TT3
Specification and Features
Please highlight and click on the links below for more details.
Arming/disarming
The i-mob system utilise the ignition circuit whereby the system 'arms' once the ignition is turned off and then ‘disarms’ once the ignition is turned on.
Please also see the Key Theft protection section for other options.
Key Theft Identification – Convenient SMS and/or Vocal Programming/Setting
i-mob systems have the ability to recognise the use of stolen keys.
Owners may manually 'arm' the system overriding the automatic disarming that would normally occur when the ignition was turned on.
This manual 'arming' may be achieved by the use of a simple template text message or by a voice call to the system. Whilst in this state any use of the vehicles keys or indeed ‘hot wiring’ will result in an immediate alert.
Lift/Tilt Sensor
Every i-mob system features a complex, digital, lift/tilt sensor which is automatically activated 150 seconds after the ignition is switched off.
Owing to its digital operation the vehicle may be parked at any angle. Once activated the sensor takes this position as its standard. Any subsequent variance +/- 2.5° from this standard will trigger the sensor and generate an alert call.
The sensor is automatically deactivated immediately once the ignition is turned on.
Internal Back Up Battery
All i-mob systems feature an internal back up battery.
The system will constantly monitor its permanent power supply. If this supply is disconnected then it will automatically switch to its internal battery and transmit an alert call to warn of the disconnection.
The status of the power supply is also monitored and if this supply falls below 9.5v an alert call will again be generated.
Remote immobilisation capability
i-mob TT3 system features advanced immobilisation.
In standard configuration the system executes the immobilisation in the following way;
1. First Ignition Off – ensures the vehicle cannot be restarted
With i-mob systems it is NOT possible to immobilise a moving vehicle.
Communications by voice and/or SMS
For convenience and ease of use, i-mob systems can communicate with any outside party utilising voice calls, SMS or both together. This enables i-mob systems to interact with their owners allowing them to issue commands to the system directly from the key pad of the phone. All systems are PIN code protected to ensure authorised use only.
Phone Book with SMS options
The i-mob system can be programmed with 3 customer phone numbers. These numbers can be set to receive alarm calls via voice call and optionally via SMS as well. In the event that the customer is not available to receive the alarm call the system will call the monitoring centre.
SMS alerts include time/date, location and status confirmation
SMS alerts are directed to any SMS activated numbers in the systems phone book. The SMS’s are despatched simultaneous immediately prior to the first voice call.
The SMS will contain confirmation of the type of alert being issued, the time and date of the alert (GMT) and the position and speed of the vehicle at that moment.
This information may be retained by the owner for an insurer or Police authority.
GPS position & time date confirmation
The i-mob system provides accurate position reports in the form of longitude and latitude. These co-ordinates can be entered in to either the i-mob converter program (for use with Google earth) or i-mob Locator program (for use with Microsoft AutoRoute) see ‘Customer area’ for free downloads.
The GPS data also automatically provides the system with highly accurate time and date information (GMT) to be included within any alerts and the history log.
Password Alarm
All i-mob units require the use of a PIN code in order to access and control the System. This PIN code is decided by the owner.
If three consecutive attempts are made to access the system using the wrong PIN code the call will be automatically disconnected and an alert will be sent to the owner and/or monitoring service advising them of the situation.
Options
Due to the sophisticated design of the i-mob TT3 system there are a wide range of options available for customers with specific requirements please visit this link http://www.i-mob.com/imob-productrange07.asp or contact us via email info@i-mob.co.uk Tel: 08708 500800
Specification and Features
Please highlight and click on the links below for more details.
- Arming/disarming
- Key Theft Identification – Convenient SMS and/or Vocal Programming/Setting
- Lift/Tilt Sensor
- Internal Back Up Battery
- Remote immobilisation
- Communications by voice and/or SMS
- Phone Book with SMS options
- SMS alerts include time/date, location and status confirmation
- GPS position & time date confirmation
- Password Alarm
- Options
Arming/disarming
The i-mob system utilise the ignition circuit whereby the system 'arms' once the ignition is turned off and then ‘disarms’ once the ignition is turned on.
Please also see the Key Theft protection section for other options.
Key Theft Identification – Convenient SMS and/or Vocal Programming/Setting
i-mob systems have the ability to recognise the use of stolen keys.
Owners may manually 'arm' the system overriding the automatic disarming that would normally occur when the ignition was turned on.
This manual 'arming' may be achieved by the use of a simple template text message or by a voice call to the system. Whilst in this state any use of the vehicles keys or indeed ‘hot wiring’ will result in an immediate alert.
Lift/Tilt Sensor
Every i-mob system features a complex, digital, lift/tilt sensor which is automatically activated 150 seconds after the ignition is switched off.
Owing to its digital operation the vehicle may be parked at any angle. Once activated the sensor takes this position as its standard. Any subsequent variance +/- 2.5° from this standard will trigger the sensor and generate an alert call.
The sensor is automatically deactivated immediately once the ignition is turned on.
Internal Back Up Battery
All i-mob systems feature an internal back up battery.
The system will constantly monitor its permanent power supply. If this supply is disconnected then it will automatically switch to its internal battery and transmit an alert call to warn of the disconnection.
The status of the power supply is also monitored and if this supply falls below 9.5v an alert call will again be generated.
Remote immobilisation capability
i-mob TT3 system features advanced immobilisation.
In standard configuration the system executes the immobilisation in the following way;
1. First Ignition Off – ensures the vehicle cannot be restarted
With i-mob systems it is NOT possible to immobilise a moving vehicle.
Communications by voice and/or SMS
For convenience and ease of use, i-mob systems can communicate with any outside party utilising voice calls, SMS or both together. This enables i-mob systems to interact with their owners allowing them to issue commands to the system directly from the key pad of the phone. All systems are PIN code protected to ensure authorised use only.
Phone Book with SMS options
The i-mob system can be programmed with 3 customer phone numbers. These numbers can be set to receive alarm calls via voice call and optionally via SMS as well. In the event that the customer is not available to receive the alarm call the system will call the monitoring centre.
SMS alerts include time/date, location and status confirmation
SMS alerts are directed to any SMS activated numbers in the systems phone book. The SMS’s are despatched simultaneous immediately prior to the first voice call.
The SMS will contain confirmation of the type of alert being issued, the time and date of the alert (GMT) and the position and speed of the vehicle at that moment.
This information may be retained by the owner for an insurer or Police authority.
GPS position & time date confirmation
The i-mob system provides accurate position reports in the form of longitude and latitude. These co-ordinates can be entered in to either the i-mob converter program (for use with Google earth) or i-mob Locator program (for use with Microsoft AutoRoute) see ‘Customer area’ for free downloads.
The GPS data also automatically provides the system with highly accurate time and date information (GMT) to be included within any alerts and the history log.
Password Alarm
All i-mob units require the use of a PIN code in order to access and control the System. This PIN code is decided by the owner.
If three consecutive attempts are made to access the system using the wrong PIN code the call will be automatically disconnected and an alert will be sent to the owner and/or monitoring service advising them of the situation.
Options
Due to the sophisticated design of the i-mob TT3 system there are a wide range of options available for customers with specific requirements please visit this link http://www.i-mob.com/imob-productrange07.asp or contact us via email info@i-mob.co.uk Tel: 08708 500800